A modest addition of palladium into zinc oxide catalysts significantly accelerates the photochemical destruction of the pharmaceutical contaminant metronidazole while ensuring the treated effluent remains non-toxic to aquatic organisms, according to experimental findings published in the Journal of Materials Science. Investigators demonstrated that synthesizing zinc oxide with a nominal one percent palladium loading yields an optimal structural configuration that surpasses both pristine zinc oxide and higher-doped five percent formulations in catalytic efficiency. The nominal one percent composition achieved an apparent metronidazole removal efficiency of 86.0 percent within two hours of ultraviolet illumination, outpacing the 56.0 percent conversion obtained with unpromoted zinc oxide and the 79.9 percent registered with the five percent composite. Beyond evaluating pharmaceutical degradation rates, the research team conducted ecotoxicological assessments using brine shrimp, establishing that the aqueous phase treated by the optimized catalyst sustained a perfect one-hundred percent organism survival rate over forty-eight hours.
Introducing noble metals such as palladium can theoretically facilitate charge separation and provide reactive contact interfaces; however, the physical mechanisms governing low dopant concentrations have remained insufficiently resolved. Researchers set out to determine whether an effective photocatalytic response could be sustained in the dilute-palladium regime, thereby minimizing precious-metal expenditures while tailoring host lattice distortion and surface electronic environments.
To establish how low noble-metal concentrations influence the semiconductor host, the team fabricated powder specimens with nominal palladium contents of zero, one, and five atomic percent, designated respectively as ZP0, ZP1, and ZP5. The materials were prepared via a high-temperature solid-state reaction utilizing high-purity zinc oxide and palladium oxide precursors blended in stoichiometric proportions. Precursor mixtures underwent twenty minutes of manual homogenization in an agate mortar before thermal processing in air at 950 degrees Celsius for eight hours, employing a controlled heating rate of ten degrees Celsius per minute. Following furnace cooling, the calcined cakes were reground for ten minutes to yield uniform submicrometric powder agglomerates. This systematic thermal processing protocol ensured that composition remained the primary experimental variable governing the crystallization of secondary phases, solid-state diffusion, and the reorganization of near-surface coordination spheres across the specimen series.
Crystallographic examination using powder X-ray diffraction and quantitative Rietveld refinement uncovered a distinct structural divergence between the dilute and higher-content compositions. Unmodified ZP0 exhibited purely hexagonal wurtzite symmetry within space group P63mc without detectable crystalline impurities. Upon introducing nominal one percent palladium in ZP1, the wurtzite host remained the dominant crystalline matrix at 99.13 weight percent, but refinement resolved minor secondary phases consisting of 0.52 weight percent tetragonal palladium oxide and 0.35 weight percent face-centered cubic metallic palladium. Increasing the nominal loading to five percent in ZP5 did not induce further host expansion, but instead markedly elevated the segregated crystalline fractions to 2.4 weight percent palladium oxide and 2.1 weight percent metallic palladium. The simultaneous appearance of metallic palladium and palladium oxide reflects the partial thermal dissociation equilibrium of palladium oxide during prolonged air annealing at elevated temperature.
Rietveld structural modeling further revealed that the zinc oxide unit cell undergoes its greatest lattice expansion at the lower dopant threshold rather than scaling monotonically with noble-metal content. For pristine ZP0, the refined lattice parameters were a = 3.2424 angstroms and c = 5.1930 angstroms, giving a unit-cell volume of 47.30 cubic angstroms and a refined zinc-oxygen bond length of 1.973 angstroms. In the ZP1 sample, the dimensions dilated to a = 3.2479 angstroms and c = 5.2022 angstroms, representing expansions of 0.17 and 0.18 percent that elevated unit-cell volume to 47.53 cubic angstroms and extended the zinc-oxygen bond length to 1.977 angstroms. Conversely, ZP5 displayed negligible further geometric change, registering a unit-cell volume of 47.50 cubic angstroms and a bond length of 1.976 angstroms. Coherent domain sizes varied modestly from 105.0 nanometers in ZP0 to 116.5 nanometers in ZP1 and 114.3 nanometers in ZP5, confirming that long-range wurtzite periodicity was preserved without extensive lattice collapse.
Vibrational analysis via room-temperature Raman spectroscopy corroborated this non-linear host response through systematic shifts in polar and non-polar optical phonon modes. The characteristic E2-high vibration, which monitors the oxygen sublattice and zinc-oxygen framework stiffness, shifted from 437 inverse centimeters in ZP0 down to 434 inverse centimeters in ZP1, before recovering slightly to 436 inverse centimeters in ZP5. The polar A1 longitudinal optical phonon displayed an even more pronounced perturbation, shifting from 582 inverse centimeters in ZP0 down to 575 inverse centimeters in ZP1, followed by a partial rebound to 578 inverse centimeters in ZP5. This seven-wavenumber drop in ZP1 reflects enhanced local electrostatic distortions and force-constant variations. Concurrently, distinct vibrational features belonging to tetragonal palladium oxide emerged near 645 inverse centimeters and between 715 and 718 inverse centimeters, demonstrating increased integrated scattering intensity in ZP5 that directly mirrored the expansion of discrete secondary oxide domains.
Surface electronic states scrutinized through high-resolution X-ray photoelectron spectroscopy demonstrated progressive shifts in chemical environments alongside the redistribution of surface oxygen species. The binding energy of the core zinc 2p3/2 level exhibited a steady positive displacement, increasing by 0.12 electron volts from ZP0 at 1021.05 electron volts to ZP1 at 1021.17 electron volts, and reaching 1021.48 electron volts in ZP5. A coordinated positive shift occurred in the lattice oxygen signal, shifting from 529.63 electron volts in ZP0 to 529.78 electron volts in ZP1 and 529.97 electron volts in ZP5. Deconvolution of the oxygen 1s spectral region showed that ZP1 maximized the lattice oxygen proportion at 67.39 percent while reducing non-lattice hydroxyl species to 25.52 percent. In contrast, ZP5 exhibited a substantial surge in high-binding-energy adsorbed oxygen environments, which expanded from 7.10 percent in ZP1 to 27.89 percent in ZP5, suggesting a broader distribution of coordination sites across heterojunction boundaries.
Detailed fitting of the palladium 3d spectral envelope resolved three discrete oxidation configurations across the modified specimens: metallic zero-valent palladium, divalent palladium associated with palladium oxide, and an intermediate electron-deficient state denoted as Pd-delta-plus. Metallic palladium components were located at binding energies of 334.73 and 334.93 electron volts, while divalent palladium peaks occurred at 336.87 and 337.13 electron volts for ZP1 and ZP5, respectively. The intermediate component, centered near 335.93 electron volts in ZP1 and 336.10 electron volts in ZP5, constituted 58.27 percent of the palladium signal in ZP1 and climbed to 73.67 percent in ZP5. This intermediate feature reflects strong electronic coupling and localized charge redistribution across zinc oxide, palladium, and palladium oxide interfaces. Concurrently, diffuse reflectance measurements revealed that the fundamental direct optical bandgap remained stable between 3.208 and 3.223 electron volts, while Urbach tail energies broadened progressively from 62.70 millielectron volts in ZP0 to 67.40 in ZP1 and 79.70 in ZP5, tracking increased electronic disorder.
Controlled photocatalytic experiments assessed the destruction of metronidazole in aqueous suspensions maintained at twenty-four degrees Celsius under continuous ultraviolet irradiation. Aliquots drawn from a hundred-milliliter reactor containing twenty milligrams per liter of antibiotic and half a gram per liter of catalyst confirmed negligible pollutant loss during thirty minutes of dark stirring. Under ultraviolet exposure provided by a 125-watt mercury lamp calibrated at an incident irradiance of 5.9 milliwatts per square centimeter, direct photolysis yielded only twelve percent degradation over two hours. In contrast, suspensions containing ZP1 attained 86.0 percent removal, demonstrating statistically significant superiority over ZP5 at 79.9 percent and ZP0 at 56.0 percent. Kinetic analysis applying an apparent pseudo-first-order model revealed rate constants of 0.01648 reciprocal minutes for ZP1, 0.01339 for ZP5, and 0.00706 for ZP0, establishing that the one percent loading accelerated reaction kinetics by a factor of 2.33 over pristine zinc oxide.
To elucidate the chemical mechanisms driving pollutant transformation, the investigators conducted reactive-species trapping experiments on the ZP1 catalyst using selective molecular probes. The introduction of ethylenediaminetetraacetic acid as a photogenerated hole scavenger caused the most severe performance drop, suppressing metronidazole removal from 86 percent down to 57 percent. Adding methanol to quench hydroxyl radicals reduced conversion to 63 percent, whereas adding chloroform to suppress the electron-mediated oxygen reduction pathway responsible for superoxide radical formation curtailed removal to 70 percent. This documented inhibition hierarchy indicates that direct valence-band hole oxidation serves as the primary degradation pathway over ZP1, supported by cooperative secondary reactions involving hydroxyl and superoxide radicals. The electron-deficient palladium contact regions effectively capture photogenerated conduction-band electrons to drive molecular oxygen reduction, thereby retarding carrier recombination and liberating positively charged holes to oxidize target molecules adsorbed at the semiconductor surface.
Assessment of catalyst durability and acute ecotoxicity provided critical insights into practical operational limitations and environmental safety. Reusability trials across three consecutive two-hour cycles using ZP1 revealed an acute efficiency drop from 86.0 percent initially to 42.0 percent in the second cycle and 41.0 percent in the third. Post-reaction scanning electron microscopy, energy-dispersive elemental mapping, and Raman spectroscopy verified that wurtzite zinc oxide and palladium oxide phases remained intact without loss of elemental dispersion, suggesting that catalyst deactivation stemmed primarily from mechanical recovery losses, aggregate compaction, and surface fouling by reaction intermediates. Concurrently, toxicity screening utilizing Artemia salina brine shrimp nauplii established that water treated with ZP1 retained one-hundred percent organism survival at both twenty-four and forty-eight hours, matching negative controls and confirming that catalytic decomposition of metronidazole avoids generating acutely toxic transformation products.
Subject of Research: Photocatalytic removal of metronidazole using low-palladium zinc oxide composites and aquatic toxicity evaluation
Article Title: Lattice and interfacial state modulation in low-Pd ZnO for metronidazole removal and acute toxicity assessment of treated water
Article References: Silva-Benigno, M. B., Romaguera-Barcelay, Y., Jerônimo, A. G., da Silva, T. M., Sá, M. R., Govea-Alcaide, E., & Peña-Garcia, R. R. (2026). Lattice and interfacial state modulation in low-Pd ZnO for metronidazole removal and acute toxicity assessment of treated water. Journal of Materials Science. https://doi.org/10.1007/s10853-026-14092-x
Image Credits: AI Generated
DOI: 10.1007/s10853-026-14092-x
Keywords: zinc oxide, palladium doping, photocatalysis, metronidazole, water treatment, Rietveld refinement, X-ray photoelectron spectroscopy, Raman spectroscopy, Urbach energy, reaction kinetics, scavenging assays, photoluminescence, catalyst reusability, Artemia salina, acute toxicity, antibiotic degradation, semiconductor photocatalyst
